Dear friends, We sincerely invite you to participate in our driver testing seminar at GETEC Aldenhoven on 30/06/2022.

In the seminar you will get a complete overview of the testing process in the automotive industry and understanding the main techniques and tools used in testing can help you in your strategic planning for product development. We are fortunate to have our partners: COMPREDICT and Meta, who will share their experience with virtual sensor applications and investigations on the vehicle test bench.

Drive Testing is independent of any dyno capacity, it is possible to evaluate the complete vehicle and the measurements represent the real use on the road, including different weather conditions, different driver types, different road profiles and conditions such as rush hour and traffic jams, etc.

These tests have the following obvious advantages:

  • Quick start of the test in the real environment compared to the testbench.
  • Representation of the real load compared to the simulated load on the test bench
  • Testing of the complete system on the road
  • Acquisition of real road data for use on the test bench
Time Topic Presenter
AM 9:30-9:45 Greeting and Introduction Mr. Joachim Trumpff
General Manager
9:45-10:35 Vehicle testing on the road

-Advantages of vehicle testing

-What should be considered during preparation?

-How is the test carried out

Mr. Torsten Hempel
Application Expert
10:35-10:50 All All
10:50-11:20 How Virtual Sensors Deliver Vehicle Test Data on a Large Scale

-How does a Virtual Sensor work?

-Overview of COMPREDICT’s Virtual Sensor Platform

-Dedicated data loggers for R&D with LTE and unlimited data volume

-Advantages of Virtual Sensors in terms of cost reduction and acceleration of testing and development.

Dr. Rafael Fietzek
Co-Founder – Executive Director
11:20-11:50 Data measurement and analysis

-Analysis of driver behavior

-Speed and consumption performance testing

-Load evaluation

-Use of the data for the test cycle

Mr. Lucas Crampen
Application and Testing
Noon 12:00-13:30 Lunch
PM 13:30-14:00 Vehicle test bench investigations

-Different test bench setups for different test objectives

-Benchmark investigations

-Performance tests

-NVH measurement

Mr. Olaf Metzger
Director Hybrid Systems and Controls
Meta Motoren- und Energie-Technik GmbH
14:00-15:00 Vehicle demonstration with sensor and data logger Mr. Redzo Sakanovic
Application and Testing Manager
15:00-15:30 Product development and optimization based on road load data

-Requirement definition

-Product verification and optimization

Mr. Torsten Langheinrich
Design Drivetrain Development Engineer
15:30-16:30 Testbench tour Mr. Joachim Trumpff
General Manager
16:30-17:00 Q&A All
17:00-17:15 Certificates


Seminar Information:

Date: 30.06.2022

Time: 9:30-17:15

Venue: GETEC Aldenhoven, Germany


Attend for free, order 1st, get 1st.

This seminar is free of charge for our participants and places are limited. Therefore, we strongly recommend that you confirm your place in advance.

Registration is required to guarantee your place: marketing@getec-gmbh.com or Michael.Spielmann@getec-gmbh.com

Share this post

Start typing and press Enter to search

Shopping Cart